2bc41aeb8602
history.rs
use super::{Arc, Document, Selection};
#[cfg(test)]
thread_local! {
/// Tests: how many undo steps were copied on this thread.
pub(crate) static ENTRY_CLONES: std::cell::Cell<usize> = const { std::cell::Cell::new(0) };
}
/// One undo step.
#[derive(Debug)]
pub struct HistoryEntry {
pub label: String,
/// The document as it was. It keeps no lookup cache ([`Document::drop_lookup_cache`]): a
/// table per step would add up, and undoing builds it again once.
pub doc: Arc<Document>,
/// The selection as it was, shared with the neighbouring steps that have the same one.
pub selection: Arc<Selection>,
/// Roughly the memory this step keeps of its own: the unshared document data
/// ([`Document::retained_bytes`]) plus owned color-mode paint snapshots.
pub bytes: usize,
/// The same the other way round: what that next state keeps that `doc` doesn't share. Undoing
/// (redoing) this step makes a step that keeps the next state: this is its `bytes`.
next_bytes: usize,
/// Which document the figures were taken against (its address): the next state.
next: usize,
/// The template and name `label` was made from ([`Session::edit_named`]).
pub(crate) named: Option<NamedStep>,
/// A number no other step takes ([`History::step`]).
serial: u64,
/// Original and changed new-art paints, only for steps that change them: a document color mode
/// change, and a pattern Cancel, Delete or rename that clears or renames a pattern paint.
pub(crate) color_mode_paints: Option<(vectorcraft_tools::PaintDefaults, vectorcraft_tools::PaintDefaults)>,
/// Owned new-art snapshots included in both directional estimates.
color_mode_bytes: usize,
/// The state that changes without an undo step as the next state had it: undo and redo compare
/// it with `doc` to tell what the step changed.
pub(crate) unrecorded: Arc<crate::cmd::Unrecorded>,
}
impl Clone for HistoryEntry {
fn clone(&self) -> Self {
#[cfg(test)]
ENTRY_CLONES.with(|n| n.set(n.get() + 1));
HistoryEntry {
label: self.label.clone(),
doc: self.doc.clone(),
selection: self.selection.clone(),
bytes: self.bytes,
next_bytes: self.next_bytes,
next: self.next,
named: self.named.clone(),
serial: self.serial,
color_mode_paints: self.color_mode_paints.clone(),
color_mode_bytes: self.color_mode_bytes,
unrecorded: self.unrecorded.clone(),
}
}
}
/// The next [`HistoryEntry::serial`]: 1 for the first step made, so 0 never names a step.
fn next_serial() -> u64 {
static NEXT: std::sync::atomic::AtomicU64 = std::sync::atomic::AtomicU64::new(1);
NEXT.fetch_add(1, std::sync::atomic::Ordering::Relaxed)
}
/// A step name made by filling the `{name}` placeholder of a template with a name
/// ([`Session::edit_named`]).
#[derive(Clone, Debug, PartialEq, Eq)]
pub struct NamedStep {
/// The English template, with one `{name}` placeholder (`Apply {name}`).
pub template: &'static str,
/// The name in the placeholder, as the document holds it (a style's name).
pub name: String,
/// The name is one VectorCraft gives (`[Normal Character Style]`), not one the user typed.
pub built_in: bool,
}
impl NamedStep {
/// The step name: the template with the name in its placeholder.
pub fn label(&self) -> String {
self.template.replace("{name}", &self.name)
}
}
impl HistoryEntry {
/// A step keeping `doc` and `selection`, as they were before the edit that made `next`.
pub(crate) fn kept(label: String, doc: Arc<Document>, selection: Arc<Selection>, next: &Document) -> Self {
doc.drop_lookup_cache();
let (bytes, next_bytes) = doc.retained_bytes_each(next);
HistoryEntry {
label,
doc,
selection,
bytes,
next_bytes,
next: std::ptr::from_ref(next) as usize,
named: None,
serial: next_serial(),
color_mode_paints: None,
color_mode_bytes: 0,
unrecorded: Arc::new(crate::cmd::Unrecorded::of(next)),
}
}
/// The template and name the step's label was made from, while the label is still the one
/// they make: `None` for a step named any other way, and for one whose label was changed
/// since it was recorded.
pub fn named(&self) -> Option<&NamedStep> {
self.named.as_ref().filter(|n| n.label() == self.label)
}
/// The step that undoing (redoing) the step `costs` came from makes: it keeps `doc`, the
/// document before the undo, whose next state is now `now` (that step's document). Its figures
/// are that step's the other way round when `doc` is still the document they were taken
/// against (nothing replaced it since), so undo and redo needn't walk the documents again. A
/// change made to it in place without an undo step (a setting, a refresh) goes unnoticed: a
/// small error, for an estimate.
pub(crate) fn turned(label: String, doc: Arc<Document>, selection: Arc<Selection>, now: &Arc<Document>, costs: StepCosts) -> Self {
if costs.next != Arc::as_ptr(&doc) as usize {
return Self::kept(label, doc, selection, now);
}
doc.drop_lookup_cache();
HistoryEntry {
label,
doc,
selection,
bytes: costs.next_bytes,
next_bytes: costs.bytes,
next: Arc::as_ptr(now) as usize,
named: None,
serial: next_serial(),
color_mode_paints: None,
color_mode_bytes: 0,
unrecorded: Arc::new(crate::cmd::Unrecorded::of(now)),
}
}
/// Recount the separately owned paints after a color-mode step or group changes them.
pub(crate) fn recost_paints(&mut self) {
let owned = |p: &vectorcraft_tools::PaintDefaults| {
std::mem::size_of::<vectorcraft_tools::PaintDefaults>()
+ vectorcraft_doc::paint_heap_bytes(&p.fill)
+ vectorcraft_doc::paint_heap_bytes(&p.stroke)
+ p.appearance.as_ref().map_or(0, vectorcraft_doc::appearance_heap_bytes)
+ p.style.as_ref().map_or(0, String::capacity)
};
let bytes = self.color_mode_paints.as_ref().map_or(0, |(before, after)| owned(before).saturating_add(owned(after)));
self.bytes = self.bytes.saturating_sub(self.color_mode_bytes).saturating_add(bytes);
self.next_bytes = self.next_bytes.saturating_sub(self.color_mode_bytes).saturating_add(bytes);
self.color_mode_bytes = bytes;
}
/// The document-only figures [`HistoryEntry::turned`] reuses. Its paint snapshots are
/// attached and counted separately, so swapping direction never doubles their cost.
pub(crate) fn costs(&self) -> StepCosts {
StepCosts {
bytes: self.bytes.saturating_sub(self.color_mode_bytes),
next_bytes: self.next_bytes.saturating_sub(self.color_mode_bytes),
next: self.next,
}
}
}
/// A step's memory figures ([`HistoryEntry::costs`]).
#[derive(Clone, Copy, Debug)]
pub(crate) struct StepCosts {
bytes: usize,
next_bytes: usize,
next: usize,
}
/// The undo history of a document: bounded by a number of steps (Preferences › Performance ›
/// History States) and by the memory the steps keep ([`History::byte_budget`]).
#[derive(Clone, Debug)]
pub struct History {
pub undo: Vec<HistoryEntry>,
pub redo: Vec<HistoryEntry>,
/// Maximum undo depth (Illustrator has no hard limit; snapshots are cheap here).
pub limit: usize,
/// About the most memory the steps may keep ([`HistoryEntry::bytes`]): past it the oldest
/// steps go, but never the last [`History::MIN_STEPS`] undo (and redo) steps. The histories of a
/// session's open documents also share [`Session::history_budget`](crate::Session::history_budget).
pub byte_budget: usize,
/// Counts the changes made in place to steps below the newest ([`History::put_back`]).
pub(crate) rewrites: u64,
/// Between [`History::mark`] and [`History::release`] or [`History::put_back`].
pub(crate) held: bool,
/// The redo steps a new step cleared while held ([`History::clear_redo`]).
pub(crate) set_aside: Option<Vec<HistoryEntry>>,
}
impl Default for History {
fn default() -> Self {
History { undo: vec![], redo: vec![], limit: 0, byte_budget: default_history_budget(), rewrites: 0, held: false, set_aside: None }
}
}
/// What [`History::put_back`] needs to give a history back as it was when [`History::mark`] took
/// it: the newest undo and redo steps, and where each stack stood under them. It holds no other
/// step, so taking one costs the same however many the history holds.
pub(crate) struct HistoryMark {
undo: StackMark,
redo: StackMark,
limit: usize,
byte_budget: usize,
rewrites: u64,
}
/// One stack of a [`HistoryMark`].
struct StackMark {
len: usize,
/// [`HistoryEntry::serial`] of the step under the newest one, 0 for none.
below: u64,
newest: Option<HistoryEntry>,
}
impl StackMark {
fn of(steps: &[HistoryEntry]) -> Self {
let len = steps.len();
StackMark { len, below: len.checked_sub(2).and_then(|i| steps.get(i)).map_or(0, |e| e.serial), newest: steps.last().cloned() }
}
/// Puts `steps` back as they were. → `false` when a step under the newest one was removed since.
fn put_back(self, steps: &mut Vec<HistoryEntry>) -> bool {
let kept = self.len.saturating_sub(1);
let intact = steps.len() >= kept && kept.checked_sub(1).is_none_or(|i| steps.get(i).is_some_and(|e| e.serial == self.below));
steps.truncate(kept);
steps.extend(self.newest);
intact
}
}
impl History {
/// Undo (and redo) steps kept whatever memory they take.
pub const MIN_STEPS: usize = 8;
/// Roughly the memory the steps keep of their own ([`HistoryEntry::bytes`]).
pub fn bytes(&self) -> usize {
self.undo.iter().chain(&self.redo).map(|e| e.bytes).sum()
}
/// Which step the document is at: the newest undo step and the next redo step, by numbers no
/// other step takes (0 for none). Every new step, Undo, Redo and edit merged into the newest
/// step (an undo group) changes it; a selection change does not.
pub fn step(&self) -> (u64, u64) {
(self.undo.last().map_or(0, |e| e.serial), self.redo.last().map_or(0, |e| e.serial))
}
/// The document at row `row` of the History panel, `now` being the document now: the rows before
/// it are the undo steps, oldest first, and the rows after it the redo steps, nearest first.
pub(crate) fn state<'a>(&'a self, now: &'a Arc<Document>, row: usize) -> Option<&'a Arc<Document>> {
let current = self.undo.len();
match row.cmp(¤t) {
std::cmp::Ordering::Less => self.undo.get(row).map(|e| &e.doc),
std::cmp::Ordering::Equal => Some(now),
std::cmp::Ordering::Greater => self.redo.len().checked_sub(row - current).and_then(|i| self.redo.get(i)).map(|e| &e.doc),
}
}
/// Let the oldest steps go while over the step limit or the memory budget: undo steps first
/// (the oldest), then redo steps (the furthest ahead).
pub fn trim(&mut self) {
let over = self.undo.len().saturating_sub(self.limit);
if over > 0 {
self.undo.drain(..over);
}
let mut total = self.bytes();
if total <= self.byte_budget {
return;
}
let mut n = 0;
while total > self.byte_budget && self.undo.len() - n > Self::MIN_STEPS {
total -= self.undo.get(n).map_or(0, |e| e.bytes);
n += 1;
}
self.undo.drain(..n);
let mut n = 0;
while total > self.byte_budget && self.redo.len() - n > Self::MIN_STEPS {
total -= self.redo.get(n).map_or(0, |e| e.bytes);
n += 1;
}
self.redo.drain(..n);
}
/// A [`HistoryMark`] of the history now. Until [`History::release`] or [`History::put_back`],
/// [`History::trim`] lets no step go, so the steps under the newest one stay where they are, and
/// [`History::clear_redo`] sets the redo steps aside.
pub(crate) fn mark(&mut self) -> HistoryMark {
let mark = HistoryMark {
undo: StackMark::of(&self.undo),
redo: StackMark::of(&self.redo),
limit: self.limit,
byte_budget: self.byte_budget,
rewrites: self.rewrites,
};
self.limit = usize::MAX;
self.byte_budget = usize::MAX;
self.held = true;
self.set_aside = None;
mark
}
/// Removes the redo steps, as a new step does. While held ([`History::mark`]) the first call
/// keeps them for [`History::put_back`].
pub(crate) fn clear_redo(&mut self) {
if self.held && self.set_aside.is_none() {
self.set_aside = Some(std::mem::take(&mut self.redo));
} else {
self.redo.clear();
}
}
/// Keeps the history as it is now: the limits `mark` held back apply again.
pub(crate) fn release(&mut self, mark: &HistoryMark) {
self.held = false;
self.set_aside = None;
self.limit = mark.limit;
self.byte_budget = mark.byte_budget;
self.trim();
}
/// Gives the history back as it was at `mark`. → `false` when that is not possible: an undo or
/// redo step under the newest one was removed or changed in place since.
pub(crate) fn put_back(&mut self, mark: HistoryMark) -> bool {
if let Some(redo) = self.set_aside.take() {
self.redo = redo;
}
let undo = mark.undo.put_back(&mut self.undo);
let redo = mark.redo.put_back(&mut self.redo);
let intact = self.rewrites == mark.rewrites && undo && redo;
self.held = false;
self.limit = mark.limit;
self.byte_budget = mark.byte_budget;
intact
}
/// Estimate the newest undo step again, its next state now being `now` (the steps after it were
/// merged into it, or an undo group extended it). It takes a new number ([`History::step`]).
pub(crate) fn recost_last(&mut self, now: &Document) {
if let Some(e) = self.undo.last_mut() {
let (before, after) = e.doc.retained_bytes_each(now);
e.bytes = before.saturating_add(e.color_mode_bytes);
e.next_bytes = after.saturating_add(e.color_mode_bytes);
e.next = std::ptr::from_ref(now) as usize;
e.serial = next_serial();
e.unrecorded = Arc::new(crate::cmd::Unrecorded::of(now));
}
}
}
/// Let the oldest steps of `histories` go while together they keep more than `budget`
/// ([`History::bytes`]): undo steps first, the oldest of all the histories first, then redo steps,
/// the furthest ahead first. Each history keeps its last [`History::MIN_STEPS`] undo (and redo)
/// steps, and a held one ([`History::mark`]) keeps all of its steps; their memory still counts.
pub(crate) fn trim_together<'a>(histories: impl IntoIterator<Item = &'a mut History>, budget: usize) {
let all: Vec<&mut History> = histories.into_iter().collect();
let mut total = all.iter().fold(0usize, |t, h| t.saturating_add(h.bytes()));
if total <= budget {
return;
}
fn steps(h: &History, redo: bool) -> &[HistoryEntry] {
if redo { &h.redo } else { &h.undo }
}
let mut free: Vec<&mut History> = all.into_iter().filter(|h| !h.held).collect();
for redo in [false, true] {
// How many of each history's oldest steps go.
let mut gone = vec![0usize; free.len()];
while total > budget {
// The oldest step any history may still let go.
let next = free
.iter()
.zip(&gone)
.enumerate()
.filter(|(_, (h, n))| steps(h, redo).len().saturating_sub(**n) > History::MIN_STEPS)
.filter_map(|(i, (h, n))| steps(h, redo).get(*n).map(|e| (e.serial, i, e.bytes)))
.min();
let Some((_, i, bytes)) = next else { break };
total = total.saturating_sub(bytes);
if let Some(n) = gone.get_mut(i) {
*n += 1;
}
}
for (h, n) in free.iter_mut().zip(gone) {
let steps = if redo { &mut h.redo } else { &mut h.undo };
steps.drain(..n.min(steps.len()));
}
}
}
/// What [`Session::trim_histories`](crate::Session::trim_histories) last left: the budget, and for
/// each open document its uid and what a new, undone, redone, merged, recosted, removed or put-back
/// step changes in its history.
pub(crate) type HistoriesSeen = (usize, Vec<(u64, (u64, u64), usize, usize, usize, u64, bool)>);
impl crate::Session {
/// Let the oldest undo and redo steps of the open documents go while together they keep more
/// than [`Session::history_budget`](crate::Session::history_budget) ([`trim_together`]). While a
/// script runs, its commands leave the histories as they are: the run's end trims them. While an
/// undo group is open in any document, the histories stay as they are too, so a canceled group
/// leaves the other documents' steps in place: closing the groups trims them. When
/// neither the budget nor any history changed since the last call, the steps are not counted
/// again.
pub(crate) fn trim_histories(&mut self) {
if self.script_in_run || self.docs.iter().any(|d| d.undo_group.is_some()) {
return;
}
if self.histories_seen.as_ref() == Some(&self.histories_now()) {
return;
}
trim_together(self.docs.iter_mut().map(|d| &mut d.history), self.history_budget);
self.histories_seen = Some(self.histories_now());
}
fn histories_now(&self) -> HistoriesSeen {
let doc = |d: &crate::DocState| {
let h = &d.history;
(d.uid, h.step(), h.undo.len(), h.redo.len(), h.undo.last().map_or(0, |e| e.bytes), h.rewrites, h.held)
};
(self.history_budget, self.docs.iter().map(doc).collect())
}
}
/// The default [`History::byte_budget`] and [`Session::history_budget`](crate::Session::history_budget),
/// which the open documents' histories share: a quarter of the installed memory, or on Linux of the
/// process's cgroup memory limit where that is lower ([`vectorcraft_render::physical_memory`], see
/// [`history_budget_for`]); 1 GiB where the installed memory can't be read, and 256 MiB on the web.
pub fn default_history_budget() -> usize {
if cfg!(target_arch = "wasm32") {
return 256 << 20;
}
static BUDGET: std::sync::OnceLock<usize> = std::sync::OnceLock::new();
*BUDGET.get_or_init(|| history_budget_for(vectorcraft_render::physical_memory()))
}
/// The default [`History::byte_budget`] for a reading of `memory` bytes installed: a quarter of it,
/// at least 64 MiB, and at most a quarter of the address space (on 32-bit builds); 1 GiB when the
/// reading is `None` or 0.
pub(crate) fn history_budget_for(memory: Option<u64>) -> usize {
memory.filter(|&m| m > 0).map_or(1 << 30, |m| usize::try_from(m / 4).unwrap_or(usize::MAX).clamp(64 << 20, usize::MAX / 4))
}
No file is open. Choose one in the tree, or press Ctrl+O (⌘O on a Mac) to find one by name.
Syntax highlighting could not load. The unmodified read-only text remains available above.