External effect helpers
An external effect helper is a separate program that offers effects to EffectCraft. Each helper runs as a child process and talks to EffectCraft over the protocol below. EffectCraft registers every effect a helper lists as an ordinary plug-in effect: it shows up in Effects & Presets, has normal properties (keyframes, expressions, Effect Controls) and renders through the helper. Helpers exist to run native code, such as an OpenFX plug-in host, outside EffectCraft's process. If a helper crashes or hangs, EffectCraft shows the error on the effect and carries on. See ADR 0001 for why.
Using helpers
| What | How |
|---|---|
| Install | Put the helper program (effectcraft-helper-<name>, .exe on Windows) in helpers/ next to EffectCraft, in helpers/ in the settings folder, or in a folder named in EFFECTCRAFT_HELPER_PATH (a path list; entries can be programs or folders). Subfolders one level down are searched too. |
| Start | Helpers run native code, so nothing starts them unless the user asks: Effect ▸ Scan for Effect Helpers (effect.helpers.scan) starts them. To start them every time EffectCraft launches, opt in with EFFECTCRAFT_HELPERS=1. It is an environment variable, not a setting, so writing to the settings folder can't turn it on. Agents confined with --automation-read-root / --automation-write-root can't run effect.helpers.scan or effect.helpers.load, and scripts can run them only with Allow Scripts to Write Files and Access Network on. |
| Load more plug-ins | Effect ▸ Load Plug-ins Through Helper… (effect.helpers.load {path}) hands a file or folder to the helpers that accept it (an OpenFX helper takes .ofx plug-ins and .ofx.bundle folders). |
| Inspect | effect.helpers.list → {helpers: [{program, name, version, loads, running, effects, restarts, error}], blocked}; effect.plugins.list shows each effect's source (helper: …) and last render error. |
| Errors | A failed render leaves the frame as it was and puts ⚠ after the effect's name in Effect Controls (hover for the message). The next render starts the helper again. An effect that stops its helper 3 times is turned off and listed in helper_blocklist.txt in the settings folder. effect.helpers.scan {"retry": true} turns it back on. A helper that stops 5 times in a minute stays off until the next scan. |
| Timeouts | EFFECTCRAFT_HELPER_TIMEOUT (seconds per render step, default 120) and EFFECTCRAFT_HELPER_LOAD_TIMEOUT (start-up, describe, load; default 600). A helper idle for 30 s is pinged before it is used again. |
Helpers are not available in the web build.
Protocol (version 1)
EffectCraft starts the helper with the single argument --effectcraft-helper, with stdin,
stdout and stderr piped. The environment variable EFFECTCRAFT_HELPER_STATE_DIR names a folder
where the helper may keep its own records (for example, plug-ins that crashed it while
loading).
- Requests (EffectCraft → helper): one JSON object per line on stdin.
- Replies (helper → EffectCraft): one JSON object per line on stdout, prefixed with
@ec-helper(with the space). Lines without the prefix, or text before it, are logged and otherwise ignored, so plug-ins that print to stdout don't break the protocol. stderr is logged (whatever bytes it holds). - Every object has an
"op". Lines are at most 256 MB. - The helper exits when stdin closes or on
shutdown.
Frame exchange file
Pixels never go through the pipe. EffectCraft creates a file (in /dev/shm on Linux when
available, otherwise the temp folder) and names it in hello. Images are addressed by an
image ref:
{"offset": 0, "width": 1920, "height": 1080, "origin": [0, 0], "scale": 1}
The image is width × height pixels starting offset bytes into the file. Each pixel is
premultiplied RGBA as four f32s in native byte order (16 bytes), rows top to bottom, and an
image is at most 2²⁸ pixels. origin is the buffer position of layer pixel (0, 0); scale is
buffer pixels per layer pixel. EffectCraft decides every offset, so the helper only reads and
writes where it's told. On Unix, EffectCraft unlinks the file once the helper has opened it, so
nothing is left behind if either side dies. Helpers may map the file instead of reading it.
Messages
| Request | Reply | |
|---|---|---|
{"op":"hello","version":1,"frames":"<path>"} |
{"op":"hello","version":1,"name":"OpenFX","helper_version":"1.0","loads":["ofx"]} |
First message. The helper opens frames read/write. loads lists the extensions load accepts. A different version means EffectCraft won't use the helper. |
{"op":"describe"} |
{"op":"effects","effects":[{"manifest":{…},"padding":true}],"errors":["…"]} |
manifest is a plug-in API 2 manifest (id, name, category, params). padding: true means EffectCraft asks padding before each render. |
{"op":"load","path":"…"} |
effects (only the new ones) or error |
A file or folder the user picked. Replayed after a restart. |
{"op":"padding","effect":"…","instance":7,"time":1.0,"scale":1.0,"layer_size":[w,h],"flat":[…],"texts":[…]} |
{"op":"padding","pixels":3} |
Transparent pixels to add on each side before the render (at most 4096). |
{"op":"render","effect":"…","instance":7,"time":1.0,"frame":<image ref>,"layer_size":[w,h],"flat":[…],"texts":[…],"frame_rate":30,"frame_range":[0,10]} |
callbacks, then {"op":"done"} or {"op":"error","message":"…"} |
Process frame in place: read it, write the result to the same ref, reply done. flat / texts are the parameter values flattened by plug-in API 2 rules. instance identifies the applied effect (stable across frames). frame_range is the layer's source range in layer-time seconds, or null. |
{"op":"destroy","instance":7} |
none | The instance is gone; free what it holds. |
{"op":"ping"} |
{"op":"pong"} |
Heartbeat. |
{"op":"shutdown"} |
none | Exit. |
Callbacks during a render. Before it replies done, the helper may ask:
| Helper asks | EffectCraft answers |
|---|---|
{"op":"input_at","time":t} |
{"op":"image","image":<image ref>|null}: the effect's input (the layer, its masks, the effects above) at layer time t, in its own extent. |
{"op":"layer_input","param":"<layer param id>","time":t} |
image: that layer at layer time t with effects and masks, resampled into this frame's grid. |
{"op":"params_at","time":t} |
{"op":"params","values":[[flat…],[texts…]]|null} |
While a helper waits for an answer, EffectCraft may send another render (or padding). This
happens when producing the answer needs an effect of the same helper: for example, motion blur
asking for the previous frame of a layer that also has a retime effect from the same helper.
The helper must serve it completely (with its own callbacks, nested up to 16 deep) and then
keep waiting. Images for callbacks are placed after the frame in the exchange file and freed
when the render ends.
Errors and restarts
error replies are per request: the helper carries on. EffectCraft stops (kills) the helper
when it exits, closes stdout, sends a reply that doesn't parse or doesn't fit, or misses a
timeout, or stops reading its stdin for longer than the timeout. The request then fails. The next request starts a fresh process, runs hello, replays
earlier loads and recreates instances lazily: the helper sees a render for an instance it
doesn't know and creates it.
Writing a helper
Any language works: read lines, write prefixed lines, read and write a file. Rust helpers can
use effectcraft_helper_host::serve::serve with a Provider that lists EffectPlugins;
crates/helper-host/tests/it/main.rs is a complete example and the protocol test that runs
in cargo xtask ci. An unofficial OpenFX helper built this way lives in its own repository,
ec-extension-ofx.